Differential Air Shafts for Slitting BOPP

• Model NO.: 3 in or 6 in
• Load: Central Spindle
• Journal Diameter Dimensional Accuracy: IT01-IT5
• Shaft Shape: Real Axis
• Journal Surface Roughness: 2.5-0.63μm
• Transport Package: Paper Cores or Wooden Box
• Origin: China

• Material: Stainless Steel or Aluminum
• Stiffness & Flexibility: Stiffness / Rigid Axle
• Axis Shape: Straight Shaft
• Appearance Shape: Round
• Trademark: HY/huiyuan
• Specification: 3′′
• HS Code: 8482800000

Product Description
Differential Air Shafts For Slitting Bopp

 

Differential Air Shaft

Differential Shaft is a sophisticated winding shaft for slitter re-winder machine, used as duplex shaft winder (centre winding type).

1.  It is capable of compensating speed variation due to gauge variation with multi cores.
2.  Minimum 20 mm core width is possible.
3.  Reel holding is possible at any position across the width.
4.  No-time lost in re-positioning cores since no distance pieces are required.
5.  Shaft can run at very high speed.

 
This shaft consists of slotted shaft, rubber bladders, hard and ground steel cage with ball type gripper.
Sizes

1.  Suitable for core ID. 3″ and 6″
2.  Length as per requirement.

Capabilities

1.  Load up to 2 tons
2.  Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
3.  Length as required
4.  Speed up to 1000 Mtrs/min
5.  Suitable for core materials: Paper, Steel, Thermoplastics
6.  Minimum core width 20 mm

General Materials of Construction

1.  Pipe - Steel
2.  End Generals - Steel - simple or hardened
3.  Cam - Brass
4.  Lugs - Hardened Steel / Rubber

Air Shaft Manufacturer

Huiyuan SHAFT

QUICK LOCK SHAFT
Economic model for Re-winder shaft having all the advantages like slippage, accommodating gauge variation, smaller core width etc. With only limitation of time needed for repositioning of the core. This shaft is suitable for Paper Cores.
Sizes

1.  Suitable for core I.D. 3″ & 6″
2.  Length as per requirement
3.  Individual Quick Locks are also available having width of 50 mm, 36 mm, 25 mm and 20 mm. The bore of Quick Lock is tailor made.

MULTI-TUBE SHAFT
This is a very commonly used shaft. It mainly consists of slotted pipe, journals to suite users machine, lugs, rubber bladder and non-return valve. These types of shafts are suitable for both unwinding and winding stages. It can accommodate single core, multi cores of the width more than 50 mm. Type of pipe material, lug material are decided based on duty conditions like load, speed and core material. The limitations are, it cannot take care of gauge variation or individual core speed variation since slippage is not achieved and core width less than 50 mm.
Sizes

1.  Suitable for Core ID. dia 3″, 6″, 8″ (metric size and special sizes also produced)
2.  Lengths as per customers requirement

LEAF TYPE AIR EXPANDABLE SHAFT
This type of shaft mainly consists of slotted base pipe, metal leaves with knurling/serration, rubber bladder, non-return valve and suitable journals.
This type of shaft can be used at unwind station, but mainly used at rewind stage for advantages like:

1.  Narrow width of core
2.  To prevent damage to thin cores (100 % support available to the core ID.)
3.  At times core-less winding is also possible

This also has a limitation to accommodate gauge and speed variation.
Sizes

1.  Suitable for core ID. 3, 4 and 6 (metric size and special sizes also produced)
2.  Lengths as required

Lug Shaft:
Grippers are slit through the metal pipe & the pneumatic bladder is used for inflating. The grippers give positive holding of the core.
> These shafts are strong & ridged
> Standardized design allows us to manufacture the shaft in any size diameter
> The same design can be offered for heavy duty to light capability shaft
> Simple design ensuring a long service
> Staggered lug design makes it best in winding application
> Each gripper offers a designed chamfer for easy core insertion
> Dimensional tolerance of journal is very tight for better fitting & rigidity during operation
Material:
> Pipe: Steel or aluminum
> Lug: Steel, Rubber or Plastic
Available Size:
> Core ID from 2″ to 12''
> Length up to 4000mm
Option:
> Cantilever shaft
> Various size of lug (Gripper)
Ball Shaft:
A Shaft specially designed for slitters to handle constant tension on multiple slit. The base steel shaft has multiple bladders, mounted with Ball Locks for reel holding.
> Small width winging possible at very low web tension -A solution for Sensitive Material.
> Each slit material can slip at a different speed and same tension.
> Ball lock with spring design minimizing side movement while setting and running.
> Automatic tension controlling through rotary union in dynamic condition by signals from machine drive.
Available Size:
> 25mm
> 3″, 4″, 5″, 6″ any size possible
> Minimum ball lock width 24 mm onwards

Multi Bladder Shaft:
The Multi Bladder Shaft is made of Aluminum Extrusion with steel journals shrink-fitted for High Torque capability. It is assembled with a PU tube for longevity.
> the Multi bladder is very light and allows easy handling.
> Easy and quick in-house maintenance.
> One can mount core of any width as small as 4mm for slitter rewind.
Material:
> Pipe: Normally Aluminum extrusion. We use steel pipes in case of heavy requirement
> Lugs: Rubber, plastic, and Aluminum
Available Size:
> Core ID: 3″ to 12″ Length up to 3,000 mm (120″)
Option:
> Grapples can be offered as per holding requirements.
> I.E. rubbers, Engineering Plastic, and aluminum.
> We offer one piece steel Body for heavy torque.

SPARE PARTS OF AIR SHAFT
We always have following Spare Parts and accessories for most types of Air Shafts and Air Chucks readily available from Stock:

1.  Valve
2.  Hose Assemblies
3.  Protection Strip
4.  Brass Inflator End
5.  Inflator Chuck
6.  Rubber Nozzle End
7.  Continuous Rubber
8.  Lug
9.  Inflator Chuck
10.  Split Clamp
11.  Inflator Gun
12.  Standard Inflator Stem

We have.

1.  Rubber Tube of any size
2.  Midget valve 1/8″ GAS-NPT, brass
3.  Nipple valve, brass, for air hose
4.  Rubber hose, width 15.5 mm & 19.5 mm
5.  Protection strip, width 15.7 mm & 19.7 mm
6.  Clamp, top, width 15.5 mm & 19.5 mm
7.  Clamp, bottom, width 15.5 mm & 19.5 mm
8.  Flat spring, width 16 mm -0.50/+0.00 & 20 mm -0.50/+0.00
9.  Continuous rubber lug, width 15 x 0.6 H 9.2 & 20 x 0.6 H 8.3
10.  Inflator gun, metal, 1/4″ NPT, with rubber stud, incl. 2.5 m polyurethane hose

 



FAQ
 
Contact:
Tony Chan
Tel: (+86) 76987888135
Fax:(+86) 76986346382
Phone:(+86)15899911321

Our factory can design and manufacture no-standard products according to customers' requirements.
Please feel free to contact me for storage equipment any time.
We can quote you upon request, and will reply you within 24 hrs.
 

Pipes are of qualified mechanical behaviour,
meeting China national & international standards requirements.

Seamless Drill Pipe

drill pipe

Linzhou Fengbao Pipe Industry Co.,Ltd. , https://www.cfbpcoltd.com