According to the operational performance of the sapphire plant in the first half of the year, the supply of LED factory patterned sapphire substrate factory (PSS) is a big winner. Ruijie's revenue growth in the first half of the year was as high as 1.16 times, and Zhaoyuan also had more than 30%; Zhaoxin, which has a smaller revenue scale, is Doubled 2.24 times; also used as long crystal, flat sheet, PSS, and the growth of the crystal is more than 86. With the continuous increase of the penetration rate of the 4,6-inch sapphire PSS substrate, the unit price of the large-size PSS substrate is higher, and the demand for the third season of the PSS substrate will be further The total production capacity gap for the growth of 25,4 inch PSS substrates will continue to expand. Zhaoyuan, Ruijie and Zhaoxin's single-month revenue in the second half of the year are expected to continue to record high. Chen Yanren, general manager of Jingmei, said that the shipment of sapphire materials in the first half of the year was mainly the application of LEDs. In July, the application of optics will begin to increase, and the capacity of PSS will double to 350,000 to 400,000. It is estimated that the performance will be from July. Growing month by month. Jingmei has focused on double-throwing since last year. Apple's iPhone sapphire supply chain is supplied by Jingmei. The iPhone6 ​​is close to market. The legal person estimates that Jingmei will increase its shipments in the second half of the year. . The sapphire substrate factory of Hon Hai Group is quite different from other sapphire factories. The director of Xinjing Diamond said that the performance of sapphire substrate in the first half of the year is better than that of LED, but the monthly production capacity of Xinjing Diamond PSS is only 100,000 pieces. 700,000 pieces, so the performance of the revenue is less than ideal. The operation will be better in the second half of the year than in the first half. At the same time, as the sapphire industry is optimistic about the future application of sapphire in 3C products, and the LED lighting takes off, in order to seize business opportunities, the sapphire plant is fully expanded from the upstream long crystal, double throw and patterned sapphire substrate (PSS) plants, from the capital Fundraising on the market. In addition to Zhaoyuan, most of the sapphire traders are listed companies. Before this year, Zhaoyuan, Ruijie, Jiajing, Jingmei and other companies raised funds, which totaled 2 billion yuan (about 413 million yuan). At present, the fundraising action is still going on. Xinjing Diamond will handle the financing of 25 million shares. Zhaoyuan and Jiajing will also have new growth, with 62.5 million shares and 10 million shares increasing respectively; Zhaoxin will also raise 297 million yuan (about RMB 61.29 million). The sapphire industry said that the use of sapphire substrates for smartphones has become a trend, and the industry is striving for business opportunities. If it does not expand production this year, there will be no capacity to join the war next year. The industry revealed that the most promising business opportunities for fingerprint identification, Apple's current product is only used by iPhone5S, the future iPhone6 ​​is exclusive, a sapphire substrate can cut 18 fingerprints, and Apple products will use 5 million to 6 million doubles in a month. This amount has exceeded the use of LEDs. Due to the large number of smartphones, as long as any component is imported into sapphire material, it will cause the sapphire to be out of stock.
Medical Consumables Plastic Mould
Hospital and medical consumables refers to waste bins, disposable medical syringe, medical disposable bucket and baskets, the molding material is medical grade PP, volume can be different from 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml, 60ml to 100ml, and needle is 16G-27G, Needle material: stainless steel 304 and life is 5 years. Please review the following specifications in details:
Standard needle size:
Usage:
Tear the single bag of syringe, remove the syringe with needle, remove the syringe needle protection sleeve, pull the plunger back and forth slide, tighten the injection needle, and then into the liquid, needle up, slowly push the plunger to exclude air, subcutaneous or Intramuscular injection or blood.
Storage condition:
Disposable Medical Plastic 2 ml Syringe Luer Slip store in the relative humidity not to surpass 80%, non-corrosiveness gas, cool, ventilates good, in dryly the clean room. Product sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.
Machining equipment:
FAQ:
Q1: How do you control quality of Disposable syringe mould quality?
A: We use our CMM measuring equipment to inspect mould critical dimensions and mould tryout sample parts, all dimension reports will be shared with customer and discussed with customer the best solutions to solve "NG" dimensions.
Q2: What are the MOQ and leading time?
A: 200000pcs each type; leading time is within 35 days or based on your quantity;
Q3: What are the terms of payment?
A: 50% in advance by T/T; the balance 50% by T/T before shipping or again copy of B/L, L/C are acceptable.
Q4: How to keep us away from risk?
A: Our manufacturing is with rules of CE, ISO, welcome to visit our factory, and we can send you samples before placing an order.
Medical Consumables Plastic Mould,Metal Injection Molding,Medical Syringe Plastic Injection Mould,Disposable Syringe Plastic Injection Mould
Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com