Nanjing Sanpu Granulation Equipment Co., Ltd. has developed a new type of large-capacity sulfur granulator, rotary drum type sulfur granulator, which has sold nearly 30 sets since it was put on the market. After a long period of application inspection and further technical improvement, the granulator has now formed a 15/20/25/30 tons/hour specification equipment product, and the maximum single-machine capacity is 5 times that of the steel belt granulator.
The steel strip type sulfur granulator has been applied to the sulfur recovery process for nearly 20 years, and the processing capacity of a single unit is small. With the rapid growth of China's refining capacity, the new project is basically 10 million tons. Due to the large amount of imported crude oil, the sulfur content is relatively high, and the sulfur recovery capacity of each refinery reaches 200,000 to 300,000 tons/year. Refining companies urgently need a single sulfur granulator with a significant increase in production capacity to meet the demand for plant sulfur recovery. Nanjing Sanpu sharply captured this market information. It has developed a new type of large-capacity rotary drum granulator for three years. Its maximum single-product capacity is five times that of the steel belt granulator.
Compared with steel belt granulator, rotary drum granulator does not need to replace large wearing parts, and the loss of ton product equipment is only 1/20 of the former, and the continuous long-term running time is longer. If the equipment is operated at 8,000 hours/year, a steel belt granulator needs to be replaced in 1~2 years at a cost of 400,000 to 450,000 yuan. However, the annual cost of equipment and spare parts for the rotary drum granulator is only It is 20,000 yuan/year. At the same time, the main part of the drum granulator is only 1/3 of the floor area of ​​the steel belt granulator, which can save the company more investment in infrastructure and other infrastructure. In addition, the selling price of rotary granulator is only 1/2 of imported equipment of the same type in foreign countries, which can save a lot of money for the company.
The steel strip type sulfur granulator has been applied to the sulfur recovery process for nearly 20 years, and the processing capacity of a single unit is small. With the rapid growth of China's refining capacity, the new project is basically 10 million tons. Due to the large amount of imported crude oil, the sulfur content is relatively high, and the sulfur recovery capacity of each refinery reaches 200,000 to 300,000 tons/year. Refining companies urgently need a single sulfur granulator with a significant increase in production capacity to meet the demand for plant sulfur recovery. Nanjing Sanpu sharply captured this market information. It has developed a new type of large-capacity rotary drum granulator for three years. Its maximum single-product capacity is five times that of the steel belt granulator.
Compared with steel belt granulator, rotary drum granulator does not need to replace large wearing parts, and the loss of ton product equipment is only 1/20 of the former, and the continuous long-term running time is longer. If the equipment is operated at 8,000 hours/year, a steel belt granulator needs to be replaced in 1~2 years at a cost of 400,000 to 450,000 yuan. However, the annual cost of equipment and spare parts for the rotary drum granulator is only It is 20,000 yuan/year. At the same time, the main part of the drum granulator is only 1/3 of the floor area of ​​the steel belt granulator, which can save the company more investment in infrastructure and other infrastructure. In addition, the selling price of rotary granulator is only 1/2 of imported equipment of the same type in foreign countries, which can save a lot of money for the company.
This kind of Commutator Fusing Machine can meet the requirement of different Commutator and armature dimension. It makes the whole fusing process far more iconvinient than by manual. This machine can also be connected to Armature Production Line to meet the mass production requirement.
It can greatly reduce the larbor forces. Firstly, operator needs to load the armature core to the required tooling position. Then adjust the wedling position as per the armature. After that, press the start button. Machine will do the commutator hook fusing process.
Commutator Fusing Machine,Commutator Welding Machine,Commutator Hot Stacking Machine
Ningbo Nide Mechanical Equipment Co., Ltd. , http://www.nide-auto.com