Parking sensor and camera 2 in 1 car rear view system

Features:

1.  The closer the obstacle is, the faster the alert beeping frequency is to indicate the safety zone, caution zone and  danger zone 

2.  4-level sound to remind distance of the barrier

3.  The system will automatically start up when reversing

4.  Two or four sensors for option 

6.   Intelligent camera and sensors 2 in 1, Low profile and nice exterior, Strong anti-interference, Precise distance against obstacle measurement & display in monitor

7.   on-line output the video with obstacle's distance and position

 
 

Technical parameters: 

1.Operating voltage: 12V DC (24V available) 

2.Operation current: 20mAh ~ 200mAh 

3.Sensor installation height: 45 ~ 60cm 

4.Detection distance: 0.4 ~ 1.8m 

5.Ultrasonic frequency: 40kHz

6.Operating temperature: -40°C ~ +85°C 

7.Beep volume: 80 ~ 100dB (at 30cm distance)

 
 

Package Including:

1x Video Line
1x Sensor & Camera
1x Power cable
1x Buzzer
3x Angle Pad

 

   Parking sensor and camera 2 in 1 car rear view system

Features:

1.  The closer the obstacle is, the faster the alert beeping frequency is to indicate the safety zone, caution zone and  danger zone 

2.  4-level sound to remind distance of the barrier

3.  The system will automatically start up when reversing

4.  Two or four sensors for option 

6.   Intelligent camera and sensors 2 in 1, Low profile and nice exterior, Strong anti-interference, Precise distance against obstacle measurement & display in monitor

7.   on-line output the video with obstacle's distance and position

 
 

Technical parameters: 

1.Operating voltage: 12V DC (24V available) 

2.Operation current: 20mAh ~ 200mAh 

3.Sensor installation height: 45 ~ 60cm 

4.Detection distance: 0.4 ~ 1.8m 

5.Ultrasonic frequency: 40kHz

6.Operating temperature: -40°C ~ +85°C 

7.Beep volume: 80 ~ 100dB (at 30cm distance)

 
 

Package Including:

1x Video Line
1x Sensor & Camera
1x Power cable
1x Buzzer
3x Angle Pad

 

A buffer is a part of the buffers-and-chain coupling system used on the railway systems of many countries, among them most of those in Europe, for attaching railway vehicles to one another.
Fitted at the ends of the vehicle frames, one at each corner, the buffers are projecting, shock-absorbing pads which, when vehicles are coupled, are brought into contact with those on the next vehicle. The draw chain used between each pair of vehicles includes a screw which is tightened after coupling to shorten the chain and keep the buffers pressed together. Such is known as a 'screw coupling'.

Rail Buffer

Rail Buffer,Train Buffer Stop,Sliding Type Rail Buffer,Hydraulic Sliding Type Rail Buffer

Shenyang Lubang Railway Maintenance Machinery Co.,Ltd. , https://www.srmfrailwayequip.com