Yushu, Qinghai, "80s" couples and helpers snow-covered plateau writing love

Qinghai Yushu "80s" couples aid builders snow plateau writing love diesel generator | diesel generators price / 2012-04-17

Yushu, Qinghai Province On April 17th in Yushu plateau, the subalpine boulders were still covered by snow. From morning till night, sometimes heavy snows fell, and the weather was often far cooler than people thought. After the earthquake in Yushu two years ago, the aid workers from all over China successively entered. Many “80s” who have just walked out of the campus to overcome the various discomforts such as alpine and lack of oxygen have become the main force in the reconstruction of Yushu.
A year ago, 26-year-old Li Haihui and 24-year-old Jiang Jing as Yushu aiders came to this snowy plateau where they fell in love and fell in love with the formation of the basic framework of a new jade tree at an average altitude of 4,200 meters. Above the plateau gave birth to the fruits of their love. At the beginning of April this year, they held a simple wedding ceremony on the reconstruction site in Yushu and became a husband and wife.
This reporter recently saw this pair of "80s" couples and helpers. A small but cosy board house with a few simple pieces of furniture, a double bed with bricks on the floor, a table with lacquered wood, two folding chairs and a folding wardrobe. This is Li Haihui and Jiang Jing’s “new house”. Although the conditions are simple, they are happy compared to other “80s” aided couples who can only live in the dormitory.
The couple told reporters that before coming to Yushu, they worked together at the Beijing-Shanghai high-speed rail, where they met through acquaintances and quickly determined the relationship. After the earthquake in Yushu, the couple in love decided to go to the disaster area together and make a contribution to the reconstruction of Yushu.
Li Haihui, the technician of the Yushu General Headquarters of the China Hydropower Group, said that as young people, they should make more contributions to the reconstruction of Yushu. Before participating in the construction, I heard that the conditions in Yushu are very difficult and will stop power and water at any time. After consideration, we have fully prepared our minds.
Shandong girl Jiang Jing is responsible for the logistic work of the Yugong General Headquarters of the China Hydropower Group. She said that due to the tight construction schedule, Li Haihui is very busy and goes to the construction site every day to check the quality of the project. Only at night can the two have a short meeting time. When they mentioned the love on the plateau, she said with a smile, "Yushu is not a city that has to be rebuilt, there are no entertainment facilities, there are no dating sites, and it is a happy date to look at the big movies or go for a walk together in the dormitory."
Jing Jing told reporters that when she first came to Yushu, she often had altitude sickness and she was not adapted. However, after living and working here for a year, it has now fallen in love with this beautiful land. "If it weren't for reconstruction, I wouldn't come to this place all my life, but after my life at this job, I will definitely remember forever."
Talking about changes in Yushu over the past year, Li Haihui has a deep feeling. He said that when he first came to Yushu last year, it was still a mess and there were broken walls everywhere. After a year of rebuilding, schools, hospitals, and private houses gradually built up. It is a source of pride that many of the buildings were completed under his supervision.
The couple told reporters that after the Yushu reconstruction is completed, they still want to stay in Qinghai. The two have already bought a house in the city of Xining. They have just paid the first payment and plan to settle there. (Finish)
Next:Installation, use and regulation of marine diesel generator sets
Previous post: Man burglary ridiculed 14-year-old girl bruised his father

D Series Hybrid Servo Machine


1. The servo motor drives screw ball so to achieve macine pre-plasticizing and injection movement

2.Pre-plasticizing, backoressure, injection and holding pressure has realized full closed-loop numerical control, making injection repeat precision reach up to 0.01mm

3. The clamping structure consists of servo motor drives high precision fixed pump/ hydraulic transmission

4. Overall machine movement is timely controlled and accurately run according to products processing technology

5. Servo system as well as well-matched high response controller has fully applied to machine cycle

6. Hybrid machine has been a popular alternative for full electric machine, which is applicable to ultra-thin-wall and high precision products processing



AOTAI Servo Driving System

1. Show High Precision:The accurate injection positioning,pressure, speed ang pressure maintaining, to ensure the ensure the repeatability error of injection accuracy less than 0.3%to achieve precision molding.

2. Super Energy-Saving Features:Compared with standard injection machine, the energy saving rate can reach 40%-70% for the same plastic production.

3. High Efficiency:Compated with standard machine,the total efficiency can increase by 10% and dragging capacity is can increase by 18%

4. High Respomse System:The system acceleration and deceleration performance is quite agile and force &speed regulation is very sensitive. The sampling processing speed can reach 100KHZ and system quick start time can reach 0.05s.

5. Maintain Stability and Reliability:The pressure or speed is stable and switch of pressure maintaining is smooth and accurate.

6. Low Oil Temperature:Avoid high pressure unloading and low oil temperature situation during operation. Improve the operation performance,promote using efficiency and save a large quantity of coolong water.

 

J system characteristic

Design and reseatch on high energy-saving Injection Molding Machine has been regarder as our National Torch Plan and we are the earliest company who is engaged in this project. Servo motor can disctate different machine action according to product workmanship requirement. To inqut data into the controller and instruct different workload demand of every machine action quickly. The linearity of servo driving system operational process keeps good tracking with workmanship instrucion. In this case, the system pressure and flow becomes a closed loop, which achieves high machine performance & high energy-saving by 40%-70%. With this high-response system, the efficency of machine can be more than 98%.

 

High combination device

1. Imported brand controller

Imported options: mainly KEBA and B&R,Display the concept of high response & multfunction people-oriented control

2. CE standard system & series

hybrid system & machine series, which is honored with CE certificate, to improve the safety rate during machine operation

3. Overlap movement high speed system

Ejection or plasticizing when mold opening & clamping, to increase machine cycle and achieve high efficiency

4. High efficiency non-standard power/capacity expansion systm

Add driving function on standard machine power, so to increase operation cycle obviously & achieve super quality and high efficiency.

5. High speed acceleration/accumulator unit

Suitable for the production of thin-wall& fast molding products, so to meet the processing requirements of precision & high difficulty products

6. High precision injection unit pressure sensor device

Improve system pressure real time cycle during injection unit operation, so to realize the closed-loop effect of injection/holding pressure and pre-plasticizing & back pressure

7. High precision injection servo valve/closed-loop device

Applicable to processing requirements of extremely precision high end products, so to increase injection repeat accuracy efficiently

8. Single cylinder fast injection device

Appropriate for 360T(or below) machine is clamping unit to match single cylinder high injection molding, so to ensure the production of ultrathin-wall products ,and realize super quality and high efficiency.

9. Optimum function combination of clamping & injection

Suitable for the pertinent special products by nonstandard and optimum customized combination of clamping unit & injection unit machine, so to reach most suitable application of optimum mass production.

 


D Series Hybrid Servo Machine

D Series Hybrid Servo Machine,Mobile Phone Case Making Machine,Mobile Phone Cover Making Machine,Plastic Bottle Making Machine

NINGBO BEILUN ALLWAY MACHINERY CO., LTD. , http://www.aotai-machinery.com

Posted on